Steering Column Switch Test
WARNING: This page is about a different car, the 1995 Acura Legend. However, it is still accessible from the selected car via links, so may be relevant.
Remove steering column switch. See STEERING COLUMN COVERS under REMOVAL & INSTALLATION. Using an ohmmeter, verify continuity between switch terminals as specified in STEERING COLUMN SWITCH CONTINUITY table. See Fig 1 . If switch fails any test, replace faulty switch.
STEERING COLUMN SWITCH CONTINUITY
| Switch Position | Terminals Tilt Switch | |
|---|---|---|
| Up | C & E | |
| Down | B & C | |
| Extend-Retract Switch | ||
| Retract | C & D | |
| Extend | A & C | |
| Auto Switch | ||
| On | F & G | |
| Off | No Continuity | |