LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Acura >> 1994 >> Vigor LS, Standard >> Repair and Diagnosis >> Electrical >> Starter >> Bench Testing >> Brush Holder Test
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Brush Holder Test

  1. Ensure continuity does not exist between positive and negative brush holders. If continuity exists, replace brush holder assembly. Install brush into brush holder. Ensure brush contacts commutator.
  2. Attach a spring scale to brush spring. Measure tension of spring as spring lifts off brush. If spring tension is not within specification, replace brush holder assembly. See appropriate table under STARTER SPECIFICATIONS .
scientia non olet · About LEMON Manuals