Removal & Installation
WARNING: This page is about a different car, the 1994 Acura Legend. However, it is still accessible from the selected car via links, so may be relevant.
- Pull both tabs forward at front edge of rear lower seat cushion. Lift and remove rear lower seat cushion. Remove headrests.
- Remove 4 bolts at bottom of rear seat back cushion. Remove 2 bolts (near headrest) holding top of rear seat back cushion. Remove rear seat back cushion. Disconnect harness and remove TCS control unit. To install, reverse removal procedure. Ensure seat belts are not twisted and belt buckles are through slots in seat cushion.