LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Acura >> 1995 >> Legend SE >> Repair and Diagnosis >> External Pages >> Different car >> Section 11 (Anti-Lock Brake System) >> Diagnosis & Testing >> Abs Function Test >> Testing
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Abs Function Test: Testing

WARNING: This page is about a different car, the 1994 Acura Legend. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn ignition switch to OFF position. Connect ABS Tester (07HAJ-SG0010B) to 6-pin inspection connector. See Figure . Start engine, and release parking brake. Place mode selector in mode 1. Push START TEST button. TEST-IN-PROGRESS light should come on. DO NOT turn mode selector switch while TEST-IN-PROGRESS light is on.
  2. Ensure all 4 monitor lights on ABS tester come on within 1-2 seconds. ANTI-LOCK light should not come on. If light is on, check system for codes. See RETRIEVING CODES.
  3. Turn mode selector to mode 2. Depress brake pedal firmly, and push START TEST button. ANTI-LOCK warning light should not come on and kickback should be felt at brake pedal. If light comes on or kickback is not felt, see ANTI-LOCK WARNING LIGHT under TROUBLE SHOOTING.
  4. Repeat step 3) for remaining ABS tester modes (3, 4 and 5). Results should be as described in mode 2. If results differ, see ANTI-LOCK WARNING LIGHT. Breakdown of modes is as follows:
scientia non olet · About LEMON Manuals