LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Acura >> 1996 >> SLX >> Repair and Diagnosis >> External Pages >> Different car >> Section 13 (Servicing - A/T) >> Adjustments >> Mode Switch
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Mode Switch

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 1996 Isuzu Trooper, 1996 Isuzu Rodeo, 1996 Honda Passport, 1995 Isuzu Trooper, and 1995 Isuzu Rodeo. However, it is still accessible from the selected car via links, so may be relevant.
  1. Place gear selector lever in "N" position. Remove cover from mode switch. Disconnect gear selector lever from mode switch. Loosen switch mounting bolts. Align slot in switch housing with slot in selector shaft bushing. See Fig 1.
  2. Insert a 3/32" diameter alignment pin into both ports and rotate switch body to feel for proper alignment. Torque switch mounting bolts to specification. See TORQUE SPECIFICATIONS  table. Remove alignment pins before moving gear selector lever.
    Fig 1: Adjusting Mode Switch
    G93B00670Courtesy of ISUZU MOTOR CO.
scientia non olet · About LEMON Manuals