Section 2 (Cruise Control System): Operation: Notes

WARNING: This page is about a different car, the 1997 Acura 2.2CL. However, it is still accessible from the selected car via links, so may be relevant.

Cruise main switch is energized when ignition switch is in ON or START position. Cruise control unit is energized when cruise main switch is in ON position. Cruise control system maintains speeds greater than 25 MPH. To set, press SET switch at desired speed. Pressing main switch to off will cancel cruise control system operation and erase vehicle speed from memory.

If system is disengaged temporarily by brakelight switch, clutch switch or gearshift lever position switch, press RESUME switch. Pressing RESUME switch will automatically return vehicle to previous set speed. Pressing and holding RESUME switch will gradually increase vehicle speed without having to press accelerator pedal. When RESUME switch is released, system is reprogrammed for new speed.

For gradual deceleration without pressing brake pedal, press and hold SET switch until desired speed is reached. When desired speed is reached, release SET switch.