Security Control Unit Input Tests

NOTE: Some wires have been assigned a superscript to distinguish them from other wires of the same color. For example, the Yellow/Green(1) wire is not the same as the Yellow/Green(2) wire.

Remove glove box. Disconnect security control unit connectors. Inspect connectors and terminals. Check for bent, loose or corroded terminals. Perform security control unit input tests. See Fig 1 -Fig 3 . If security control unit input tests are all okay, replace faulty security control unit.

Fig 1: Security Control Unit Input Test (1 Of 3)

Courtesy of AMERICAN HONDA MOTOR CO., INC.

Fig 2: Security Control Unit Input Test (2 Of 3)

Courtesy of AMERICAN HONDA MOTOR CO., INC.

Fig 3: Security Control Unit Input Test (3 Of 3)

Courtesy of AMERICAN HONDA MOTOR CO., INC.