October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Using Malfunction Indicator Light (MIL)
- Locate 2-pin service check connector behind glove box. See Fig 1
. Install Service Check Connector Tool (07PAZ-0010100
) to service check connector. Turn ignition on. Observe MIL. Light indicates a Diagnostic Trouble Code (DTC) by number of blinks.
- Single-digit trouble codes (1-9) are indicated by individual short blinks. Double-digit trouble codes (10-59) are indicated by a series of long and short blinks: number of long blinks equals first digit; number of short blinks equals second digit. If any DTCs are retrieved or if MIL is inoperative, see DIAGNOSTIC TROUBLE CODE (DTC) TEST DIRECTORY
.
- To determine if code is a hard or intermittent fault, clear PCM memory and recheck for code to appear. See PCM RESET PROCEDURE/CLEARING CODES
. If codes other than those listed appear, temporarily substitute a known good PCM and retest system.
Courtesy of AMERICAN HONDA MOTOR CO., INC.