LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Acura >> 1997 >> 3.5RL >> Repair and Diagnosis >> Body & Frame >> Mirrors >> Driver's Position Memory System >> Component Tests >> Driver's Position Memory Switch Test
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Driver's Position Memory Switch Test

Remove driver's door panel. See DOOR PANEL under REMOVAL & INSTALLATION. Disconnect memory switch 10-pin connector. Using an ohmmeter, verify continuity is as specified in DRIVER'S POSITION MEMORY SWITCH CONTINUITY table. See Fig 1 . If memory switch fails any test, replace faulty switch.

Fig 1: Identifying Driver's Position Memory Switch Terminals & Buttons
G96A06592Courtesy of AMERICAN HONDA MOTOR CO., INC.
DRIVER'S POSITION MEMORY SWITCH CONTINUITY

Position Terminals No.
Memo Button
Off No Continuity
On 5 & 10
Position 1 Button
Off No Continuity
On 5 & 8
Position 2 Button
Off No Continuity
On 5 & 9
Indicator
1 (1) 2 & 4
2 (1) 1 & 4
Illumination (2) 6 & 7
(1) There is a diode in line between terminals. Place ohmmeter negative lead at terminal No. 2 for indicator 1 and terminal No. 1 for indicator 2.
(2) If no continuity exists between terminals No. 6 and 7, ensure Illumination bulb is not burnt out.
scientia non olet · About LEMON Manuals