One Or Both Mirrors Inoperative (2.3CL & 3.0CL)
- Turn ignition on. Using a voltmeter, check for battery voltage at 10-pin connector terminal No. 9 (Yellow/Black wire). See Figure. If battery voltage does not exist, check for blown fuse No. 7 (7.5-amp), located in underdash fuse/relay box. If fuse is okay, check for open in Yellow/Black wire. If battery voltage exists, go to next step.
- Turn ignition off. Using an ohmmeter, check continuity between 10-pin connector terminal No. 10 (Black wire) and ground. If no continuity exists, check for open in Black wire to ground.