October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Ignition Coil Test

Turn ignition off. Measure primary winding resistance between ignition coil connector terminals No. 1 and 2. See Fig 1. Resistance should be .9-1.1 ohms at 77°F (25°C). Replace coil if resistance is not within specification. Resistance specification for secondary winding is not available.

Fig 1: Identifying Ignition Coil Terminals (3.2TL & 3.5RL)

Courtesy of AMERICAN HONDA MOTOR CO., INC.