Door Key Cylinder Switch Test
WARNING: This page is about a different car, the 1998 Acura 3.0CL and 1998 Acura 2.3CL. However, it is still accessible from the selected car via links, so may be relevant.
Remove door trim panel. Disconnect 3-pin connector from key cylinder switch harness. Using an ohmmeter, check for continuity between indicated terminals with switch in specified position. Refer to the DOOR KEY CYLINDER SWITCH & DOOR LOCK SWITCH TEST table. Also, see Fig 1 . If continuity is not as specified, replace switch.
DOOR KEY CYLINDER SWITCH & DOOR LOCK SWITCH TEST
| Switch Position | Continuity Between Terminals No. | |
|---|---|---|
| Door Key Cylinder Switch | ||
| Locked | 2 & 3 | |
| Unlocked | 1 & 2 | |
| Door Lock Switch | ||
| Locked | 1 & 2 | |
| Unlocked | 2 & 3 | |