Remote Transmitter
WARNING: This page is about a different car, the 1998 Acura 3.0CL and 1998 Acura 2.3CL. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Procedures must be performed within the stated time limits. Four remote transmitters may be coded into system.
- Turn ignition on. Within 1-4 seconds, press remote transmitter lock or unlock button while pointing transmitter toward keyless entry control unit. Turn ignition off (within 1-4 seconds) and go to next step.
- To program another transmitter, repeat step 1). Four transmitters may be coded into keyless entry system. If more than 4 transmitters are coded, the first transmitter code will be erased. After all desired transmitters have been programmed, go to next step to verify system operation.
- Within 15 seconds of programming final transmitter, press lock or unlock button. Verify that door locks operate and go to next step.
- Check door lock operation using each transmitter. Turn ignition off and remove key. Remote transmitter codes are now stored in keyless entry system control unit. Verify door lock operation.