LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Acura >> 1998 >> 3.5RL Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 26 (Body Computer Systems) >> Component Tests >> Ignition Key Light Test >> 2.3CL, 3.0CL, 2.5TL & 3.2TL
April 5, 2026: LEMON Manuals is launched! Read the announcement.

2.3CL, 3.0CL, 2.5TL & 3.2TL

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 1998 Acura Integra, 1998 Acura 3.2TL, 1998 Acura 3.0CL, 1998 Acura 2.5TL, and 1998 Acura 2.3CL. However, it is still accessible from the selected car via links, so may be relevant.

Remove dashboard lower cover and knee bolster. Disconnect main harness 8-pin connector. Connect battery voltage (B+) to ignition switch terminal No. 4 and connect ground to terminal No. 2 (B+ to terminal No. 8 and ground to terminal No. 2 on 2.5TL & 3.2TL). See Figure . Light Emitting Diode (LED) should come on. If LED does not come on, replace LED. See IGNITION SWITCH  under REMOVAL & INSTALLATION.

scientia non olet · About LEMON Manuals