LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Acura >> 1998 >> Integra GS-R, 2D Coupe >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Cruise Control Systems >> Component Testing >> Main Switch
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Main Switch

  1. Remove main switch from instrument panel. See MAIN SWITCH  under REMOVAL & INSTALLATION. With main switch in OFF position, check for continuity between main switch terminals "B" and "C", and between terminals "D" and "E". See Fig 1 . If continuity exists, go to next step. If continuity does not exist, replace defective bulb. After replacing bulb, repeat test. If switch continuity is not as specified, replace main switch.
  2. Turn main switch to ON position. Check for continuity between main switch terminals "A" and "B", and "C", and "D" and "E". If continuity exists, switch is okay. If continuity does not exist between main switch terminals "A" and "B", replace switch. See MAIN SWITCH  under REMOVAL & INSTALLATION. If continuity does not exist between main switch terminals "B" and "C" or terminals "D" and "E", go to next step.
  3. Replace defective bulb inside main switch. After replacing bulb, repeat step 2). If continuity is not as specified, replace main switch. See MAIN SWITCH  under REMOVAL & INSTALLATION.
Fig 1: Identifying Main Switch Terminals
G94C46435Courtesy of AMERICAN HONDA MOTOR CO., INC.
scientia non olet · About LEMON Manuals