LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Acura >> 1999 >> 2.3CL Standard >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Anti-Theft Systems >> Anti-Theft & Keyless Entry Systems >> Component Testing >> Trunk Latch Switch Test
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Trunk Latch Switch Test

  1. Open trunk lid and remove trunk lid inner trim, if necessary. Disconnect trunk latch 4-pin connector. Using an ohmmeter, check for continuity between indicated trunk latch switch connector terminals with switch in specified position. See TRUNK LATCH SWITCH TEST  table. See Figure . If continuity is not as specified, replace trunk latch switch.
  2. Using jumper wire, apply battery voltage to trunk lock actuator terminal No. 4. See Figure . Using another jumper wire, connect terminal No. 1 to ground. Observe actuator operation. Replace actuator if it does not move to unlocked position.
TRUNK LATCH SWITCH TEST

Switch Position Continuity Between Terminals No.
Locked No Continuity
Unlocked 1 & 2; 1 & 3