Remote Transmitter
NOTE:
Procedures must be performed within the stated time limits. Three remote transmitters may be coded into system. If a fourth code is entered, the first code will be erased.
- Turn ignition switch to ON position. Aim transmitter at receiver (rear window) and within 4 seconds push transmitter button. Within 4 seconds, turn ignition switch to OFF position and go to next step. Repeat procedure 2 more times.
- Within 4 seconds, turn ignition switch to ON position. Aim transmitter at receiver (rear window) and within 4 seconds push transmitter button. Confirm door lock actuator operation.
- Within 9 seconds, aim first transmitter with code to be stored in receiver memory, and press transmitter button. Confirm door lock actuator operation.
- Within 9 seconds, aim a second transmitter with code to be stored in receiver memory, and press transmitter button. Confirm door lock actuator operation. Within 9 seconds, aim a third transmitter with code to be stored in receiver memory, and press transmitter button. Confirm door lock actuator operation.
- Turn ignition switch to OFF position and remove ignition key. Confirm power door lock system operation with new transmitter code(s).