LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Acura >> 2000 >> 3.5RL >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Mechanical >> 3.5L V6 Engine >> Engine Mount Control System >> System Tests >> Engine Mount Control System Check
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Engine Mount Control System Check

  1. Warm engine to normal operating temperature. Ensure idle speed is about 800 RPM. Adjust idle speed as necessary. With engine at idle, depress brake pedal. Place transmission is gear.
  2. Have an assistant disconnect 6-pin engine mount control solenoid connector located near center of firewall. If sensed idle vibration changes noticeably, system is working properly. If sensed idle vibration does not change, check control solenoid circuit. See CONTROL SOLENOID CIRCUIT CHECK .
scientia non olet · About LEMON Manuals