Cylinder Head Specifications
WARNING: This page is about a different car, the 2001 Acura Integra. However, it is still accessible from the selected car via links, so may be relevant.
CYLINDER HEAD
| Application | Specification | ||||||
|---|---|---|---|---|---|---|---|
| Cylinder Head | |||||||
| Height | 5.589-5.593" (141.96-142.06 mm) | ||||||
| Maximum Warpage | (1) 0.002" (0.05 mm) | ||||||
| Valve Seats | |||||||
| Intake & Exhaust | |||||||
| Seat Angle | 45° | ||||||
| Seat Width (B18C1 Engine) | |||||||
| Standard | 0.049-0.061" (1.24-1.55 mm) | ||||||
| Service Limit | 0.080" (2.03 mm) | ||||||
| Seat Width (B18C5 Engine) | |||||||
| Standard | 0.033-0.045" (0.84-1.14 mm) | ||||||
| Service Limit | 0.080" (2.03 mm) | ||||||
| Valve Guides | |||||||
| Intake & Exhaust | |||||||
| Valve Guide I.D. | |||||||
| Standard | 0.217-0.218" (5.51-5.53 mm) | ||||||
| Service Limit | 0.219" (5.56 mm) | ||||||
| Valve Guide Installed Height | 0.494-0.514" (12.54-13.05 mm) | ||||||
| Valve Stem-To-Guide Clearance | |||||||
| Intake | |||||||
| Standard | 0.0010-0.0022" (0.025-0.055 mm) | ||||||
| Service Limit | 0.003" (0.08 mm) | ||||||
| Exhaust | |||||||
| Standard | 0.0020-0.0031" (0.050-0.080 mm) | ||||||
| Service Limit | 0.004" (0.10 mm) | ||||||
|
|||||||