LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Acura >> 2000 >> Integra GS-R, 2D Coupe >> Repair and Diagnosis >> External Pages >> Different car >> Section 14 (1.8L 4-CYL) >> Overhaul >> Cylinder Block Assembly >> Piston Pin Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Piston Pin Installation

WARNING: This page is about a different car, the 2001 Acura Integra. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ensure piston and connecting rod are positioned as shown in illustration. See Figure. Turn handle on Piston Pin Driver (07973-PE00320) so piston driver length is 1.957" (49.71 mm).
  2. Install Pilot Collar (07LAF-PR30100) into piston and connecting rod. Lightly lubricate new piston pin. Place piston onto base. Press in piston pin.
scientia non olet · About LEMON Manuals