LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Acura >> 2000 >> Integra GS-R, 2D Coupe >> Repair and Diagnosis >> External Pages >> Different car >> Section 9 (Starters) >> Bench Testing >> Overrunning Clutch Test
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Overrunning Clutch Test

WARNING: This page is about a different car, the 2001 Acura MDX, 2001 Acura Integra, 2001 Acura 3.5RL, 2001 Acura 3.2TL, and 2001 Acura 3.2CL. However, it is still accessible from the selected car via links, so may be relevant.
  1. Slide overrunning clutch along shaft. If overrunning clutch does not slide smoothly, replace overrunning clutch assembly. Rotate overrunning clutch on shaft. See Fig 1 . If clutch does not lock when rotated in one direction and rotates smoothly in other direction, replace overrunning clutch assembly.
  2. Check starter drive gear for wear or damage. If gear is damaged, replace overrunning clutch assembly. Drive gear is not available separately. Check starter drive gear teeth for wear or damage. If starter drive gear teeth are damaged, check condition of flywheel (M/T) or flexplate (A/T).
Fig 1: Testing Overrunning Clutch (Typical)
G96J06921Courtesy of AMERICAN HONDA MOTOR CO., INC.
scientia non olet · About LEMON Manuals