Rear (Except Integra)

WARNING: This page is about a different car, the 2001 Acura MDX, 2001 Acura Integra, 2001 Acura 3.5RL, 2001 Acura 3.2TL, and 2001 Acura 3.2CL. However, it is still accessible from the selected car via links, so may be relevant.

Release parking brake. If parking brake is engaged, toe-in measurement may be incorrect. Hold adjuster bolt on lower control arm, and loosen lock nut. See Fig 1. Turn adjuster bolt until toe-in is as specified. See WHEEL ALIGNMENT SPECIFICATIONS . Install NEW lock nut, and tighten to specification. See TORQUE SPECIFICATIONS .

Fig 1: Adjusting Rear Toe-In (Typical, Except Integra)

Courtesy of AMERICAN HONDA MOTOR CO., INC.