LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Acura >> 2001 >> 3.2CL Base >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Memory Modules >> Driver's Position Memory Systems >> Component Tests >> Driver's Position Memory Switch
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Driver's Position Memory Switch

Remove driver's door panel. See DOOR PANEL  under REMOVAL & INSTALLATION. Disconnect memory switch 10-pin connector. Using an ohmmeter, verify continuity is as specified in DRIVER'S POSITION MEMORY SWITCH CONTINUITY  table. See Fig 1 . If memory switch fails any test, replace faulty switch.

DRIVER'S POSITION MEMORY SWITCH CONTINUITY

Position Continuity Between Terminals No.
Memo Button
Off No Continuity
On 7 & 10
Position 1 Button
Off No Continuity
On 9 & 10
Position 2 Button
Off No Continuity
On 8 & 10
Indicator
1 (1) 2 & 4
2 (1) 2 & 3
Illumination (2) 5 & 6
(1) There is a diode in line between terminals. If continuity is not indicated, switch DVOM leads and recheck.
(2) If no continuity exists between terminals No. 6 and 7, ensure illumination bulb is not burned out.
Fig 1: Identifying Driving Position Memory Switch Terminals
G00032322Courtesy of AMERICAN HONDA MOTOR CO., INC.
scientia non olet · About LEMON Manuals