LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Acura >> 2001 >> 3.2CL Base >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 3.2L V6 Engine >> Overhaul >> Knock Sensor >> Removal & Installation
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Removal & Installation

  1. Remove the cylinder heads. See CYLINDER HEAD .
  2. Disconnect the knock sensor connector, then remove the knock sensor. See Fig 1.
  3. Install the knock sensor.
  4. Install the cylinder heads. See CYLINDER HEAD .
Fig 1: Removing Knock Sensor
G00299060Courtesy of AMERICAN HONDA MOTOR CO., INC.
scientia non olet · About LEMON Manuals