LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Acura >> 2001 >> 3.2CL Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 23 (Wheel Alignment Specifications & Adjustment Procedures) >> Wheel Alignment Procedures >> Toe-In Adjustment >> Front
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Toe-In Adjustment: Front

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2003 Acura RSX, 2003 Acura MDX, 2003 Acura 3.5RL, 2003 Acura 3.2TL, and 2003 Acura 3.2CL. However, it is still accessible from the selected car via links, so may be relevant.
  1. Center steering wheel. Measure toe-in. Adjust toe-in if not within specification. See WHEEL ALIGNMENT SPECIFICATIONS  . If adjustment is necessary, go to next step.
  2. Loosen tie rod lock nuts. Adjust both the right and left wheels at the same time, by the same amount in opposite directions to obtain the correct toe-in and to keep the steering wheel straight. Tighten tie rod lock nuts while holding the tie-rod arm. Make sure the toe-in setting does not change. See TORQUE SPECIFICATIONS  . Re-position tie rod boot if twisted or moved out of place.
scientia non olet · About LEMON Manuals