Recline Limit Switch Test
WARNING: This page is about a different car, the 2003 Acura 3.2CL and 2002 Acura 3.2CL. However, it is still accessible from the selected car via links, so may be relevant.
Remove power seat adjustment switch cover. See FRONT SEATS under REMOVAL & INSTALLATION. Disconnect 3-pin connector from recline switch. See Fig 1 . Using a DVOM, check for continuity between terminals. When seat is tilted forward fully, continuity should exist between terminals No. 3 and 2. When seat is tilted back fully, continuity should exist between terminals No. 1 and 2. If continuity is not as specified, replace limit switch.