October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Generators & Regulators: Overhaul: Alternator

NOTE: It is only necessary to separate pulley, drive end housing and rotor when front bearing needs replacement.

To remove pulley and rotor, use 10 mm and 22 mm box wrenches to loosen pulley locknut. Use an impact wrench to remove nut if necessary.

Fig 1: Exploded View Of Alternator

Courtesy of AMERICAN HONDA MOTOR CO., INC.