LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Acura >> 2002 >> 3.2CL Base >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Seats >> Driver's Position Memory System >> System Tests >> Driver's Power Seat Control Unit
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Driver's Power Seat Control Unit

  1. Power seat control unit is located under front center of driver's seat. See FRONT SEAT  under REMOVAL & INSTALLATION. Disconnect power seat control unit connectors and check for bent, loose or corroded terminals. Repair as required. Perform power seat control unit input tests with connectors disconnected. See Fig 1 , Fig 2 , Fig 3 and Fig 4 . Repair as necessary and recheck system operation. If power seat control unit tests are okay, go to next step.
  2. Reconnect power seat control unit connectors. Perform power seat control unit input test at back of power seat control unit connectors (backprobe). See Fig 1 and Fig 5 . Repair as necessary. If all tests are okay, substitute power seat control unit with a known-good unit and recheck system operation.
Fig 1: Identifying Driver's Power Seat Control Unit Connectors & Terminals
G00032360Courtesy of AMERICAN HONDA MOTOR CO., INC.
Fig 2: Driver's Power Seat Control Unit Inputs - Connectors Disconnected (1 Of 3)
G00032361Courtesy of AMERICAN HONDA MOTOR CO., INC.
Fig 3: Driver's Power Seat Control Unit Inputs - Connectors Disconnected (2 Of 3)
G00032362Courtesy of AMERICAN HONDA MOTOR CO., INC.
Fig 4: Driver's Power Seat Control Unit Inputs - Connectors Disconnected (3 Of 3)
G00032363Courtesy of AMERICAN HONDA MOTOR CO., INC.
Fig 5: Driver's Power Seat Control Unit Inputs - Connectors Connected
G00032364Courtesy of AMERICAN HONDA MOTOR CO., INC.
scientia non olet · About LEMON Manuals