October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Door Lock Switch
- Remove appropriate door panel. See DOOR PANEL
under REMOVAL & INSTALLATION. Remove door lock switch. Disconnect door lock switch 3-pin harness connector. Check for continuity between terminals No. 1 (Black/White wire) and No. 2 (Black wire) on driver's door, and terminals No. 1 (Black/Orange wire) and No. 2 (Black wire) on front passenger's door. Continuity should exist in lock position only.
- Check continuity between terminals No. 2 (Black wire) and No. 3 (Green/Red wire) on driver's door, and terminals No. 2 (Black wire) and No. 3 (Blue/Orange wire) on front passenger's door. Continuity should exist in unlock position only. In off position, no continuity should exist between any terminals. If continuity is not as specified, replace door lock switch.