With Navigation System
- Disconnect navigation display unit connector A (5P).
- Disconnect climate control unit connector B (20P).
- Check for continuity between the following terminals of the climate control unit connector B (20P) and navigation display unit connector A (5P).CONTINUITY CHECK
Climate Control Unit Connector B (20P) Terminal No. Navigation Display Unit Connector A (5P) Terminal No. 8 2 12 4 14 3 Fig 1: Checking Continuity Between The Climate Control Unit Connector B (20P) And Navigation Display Unit Connector A (5P)Courtesy of AMERICAN HONDA MOTOR CO., INC.
Is there continuity?
- YES -Go to step 4.
- NO -Repair any open in the wire(s) between the climate control unit and the navigation display unit.
- Check for continuity between the body ground and climate control unit connector B (20P) terminals No. 8, 12 and 14 individually.Fig 2: Checking Continuity Between Body Ground And Climate Control Unit Connector B (20P) Terminals No. 8,12 And 14 Individually
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Is there continuity?
- YES -Repair any short to body ground in the wire(s) between the climate control unit and the navigation display unit.
- NO -Check for loose wires or poor connections at climate control unit connector B (20P) and at navigation display unit connector A (5P). If the connections are good, substitute a known-good climate control unit. If the problem still exists, replace the navigation display unit.