LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Acura >> 2002 >> RSX Base, Standard >> Repair and Diagnosis (Single Page) >> Body & Frame >> Door Locks >> Immobilizer System >> Immobilizer Control Unit-Receiver Replacement
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Immobilizer Control Unit-Receiver Replacement

  1. Remove the driver's dashboard lower cover (see DRIVER'S DASHBOARD LOWER COVER REMOVAL/INSTAL ).
  2. Remove the steering column covers (see STEERING COLUMN REMOVAL AND INSTALLATION ).
  3. Disconnect the 7P connector (A) from the immobilizer control unit-receiver (B).
    Fig 1: Disconnecting 7P Connector From Immobilizer Control Unit-Receiver
    G03653234Courtesy of AMERICAN HONDA MOTOR CO., INC.
  4. Remove the two screws and the immobilizer control unit-receiver from the ignition key cylinder (C).
  5. Install the immobilizer control unit-receiver in the reverse order of removal.
  6. After replacement, rewrite the unit with the HDS, then check the immobilizer system.
scientia non olet · About LEMON Manuals