Rear (Except Integra)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2000 Acura Integra, 2000 Acura 3.5RL, 2000 Acura 3.2TL, 1999 Acura Integra, and 1999 Acura 3.5RL. However, it is still accessible from the selected car via links, so may be relevant.

Release parking brake. If parking brake is engaged, toe-in measurement may be incorrect. Hold adjuster bolt on lower control arm, and loosen lock nut. See Fig 1 . Turn adjuster bolt until toe-in is as specified. See WHEEL ALIGNMENT SPECIFICATIONS . Install NEW lock nut, and tighten to specification. See TORQUE SPECIFICATIONS .

Fig 1: Adjusting Rear Toe-In (Typical, Except Integra)

Courtesy of AMERICAN HONDA MOTOR CO., INC.