TPMS Reminder Reset - Procedure 02: Notes
NOTE:
All four sensor IDs must be memorized to the TPMS control unit whenever you do any of these actions:
- Replace the TPMS control unit.
- Replace the tire pressure sensor.
- Substitute a known-good wheel with tire pressure sensor.
NOTE:
- To ensure the TPMS control unit memorizes the correct sensor ID, the vehicle with the new tire pressure sensor must be at least 10 ft (3 m) away from other vehicles that have sensors.
- When replacing the keyless access/TPMS control unit, use the HDS to memorize sensor IDs.