TPMS Reminder Reset - Procedure 03: Notes

When working with a vehicle equipped with the electronic air suspension, be sure to set it to the leveling off mode to prevent unexpected operation. Refer to the Electronic Air Suspension System Service Precautions for the procedure.

• Do this procedure if any of the following was done:
  • Body control module was replaced.
  • Tire pressure sensor was replaced.
  • A known-good wheel with a tire pressure sensor from another vehicle was substituted.
  • A tire rotation was performed.
• To ensure the body control module memorizes the correct sensor ID, the vehicle with the new tire pressure sensor must be at least 3 m (10 ft) away from other vehicles that have sensors.
• If the body control module was replaced, you must use the HDS to memorize the sensor IDs.