Tailgate Handle Replacement

NOTE: Put on gloves to protect your hands.

Remove the tailgate trim panel (see TRIM REMOVAL/INSTALLATION - TAILGATE AREA ).
Disconnect the handle cable (A) from the tailgate handle (B). Take care not to kink the cable.

Fig 1: Disconnecting Handle Cable From Tailgate Handle
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Remove the nuts, then remove the tailgate handle.
Install the tailgate handle in the reverse order of removal, and note these items:
- Make sure the handle cable is connected securely.
- Make sure the tailgate opens properly.