Rear Power Window Switch Test/Replacement
WARNING: This page is about a different car, the 2009 Acura MDX, 2008 Acura MDX, and 2007 Acura MDX. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the rear door panel (see REAR DOOR PANEL REMOVAL/INSTALLATION ), and disconnect the 14P connector from the rear power window switch.
- Remove the power window switch panel (see REAR DOOR PANEL REMOVAL/INSTALLATION ).
- Remove the three mounting screws and the rear power window switch (A).
- Swap the rear power window switch with another known-good power window switch and test. If the original power window switch is faulty; replace it.
- Install the switch in the reverse order of removal.
- Reset the power window control unit (see RESETTING THE POWER WINDOW CONTROL UNIT ).