Accelerator Pedal Module Removal/Installation

WARNING: This page is about a different car, the 2009 Acura MDX, 2008 Acura MDX, and 2007 Acura MDX. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the accelerator pedal position (APP) sensor 6P connector (A).

Fig 1: Accelerator Pedal Position (APP) Sensor 6P Connector With Torque Specification
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Remove the accelerator pedal module (B).
NOTE: The APP sensor is not available separately. Do not disassemble the accelerator pedal module.
Install the parts in the reverse order of removal.