With BOSE Sound System
When replacing an audio unit connector, match the wires to the cavities as listed in the following table.
SYSTEM DESCRIPTION
| Cavity | Wire | Connects to |
|---|---|---|
| 1 | BRN | Radio switched power (Turns ON front stereo amplifier and rear stereo amplifier relay) |
| 2 | YEL/RED | ACC (Main stereo power supply) |
| 3 | - | Not used |
| 4 | RED/WHT | Security input |
| 5 | YEL | Front stereo amplifier-right rear (+) |
| 6 | WHT | Front stereo amplifier-left rear (+) |
| 7 | ORN | Front stereo amplifier-right front (+) |
| 8 | BLU | Front stereo amplifier-left front (+) |
| 9 | RED/BLK | Lights-on signal |
| 10 | WHT/RED | Constant power |
| 11 | - | Not used |
| 12 | - | Not used |
| 13 | - | Not used |
| 14 | - | Not used |
| 15 | RED | Front stereo amplifier-right rear (-) |
| 16 | BLK | Front stereo amplifier-left rear (-) |
| 17 | GRN | Front stereo amplifier-right front (-) |
| 18 | BRN | Front stereo amplifier-left front (-) |
| 19 | RED | Dash lights brightness controller (In the gauge assembly) |
| 20 | BLK | Ground (G403) |