Function Test: Defogger
- 9. Connect the No. 1 and No. 8 terminals with a jumper wire, and check for voltage between the No. 1 terminal of the mirror connector and body ground. There should be battery voltage and both mirrors should warm up with the ignition switch ON (II).
- If there is no voltage or neither warms up, check for:
- An open in the BLK/YEL, BLK, or ORN wire.
- Blown No. 14 (10 A) fuse in the under-dash fuse/relay box.
- Poor ground (G401, G402).
- If only one fails to warm up, check its defogger.
- If both warm up, check the defogger switch.