DTC P0461: Fuel Level Sensor (Fuel Gauge Sending Unit) Range/Performance Problem

NOTE:

Before you troubleshoot, record all freeze data and any on-board snapshot, and review the general troubleshooting information (see GENERAL TROUBLESHOOTING INFORMATION ).
Because it requires 162 miles (260 km) to drive without refueling before completing this diagnosis, this DTC cannot be duplicated during this troubleshooting.

Remove the fuel tank unit from the fuel tank (see FUEL TANK UNIT REMOVAL/INSTALLATION ).
Test the fuel gauge sending unit (see FUEL GAUGE SENDING UNIT TEST ).
Is the fuel gauge sending unit OK?
1. YES - Check for poor connections or loose terminals at the fuel gauge sending unit and the PCM.
2. NO - Replace the fuel gauge sending unit (see FUEL PUMP/FUEL GAUGE SENDING UNIT REPLACEMENT ), then go to step 3.
Reset the PCM with the HDS.
Do the PCM idle learn procedure (see PCM IDLE LEARN PROCEDURE ).
Check for Temporary DTCs or DTCs with the HDS.
Are any Temporary DTCs or DTCs indicated?
1. YES - If DTC P0461 is indicated, check for poor connections or loose terminals at the fuel gauge sending unit and the gauge assembly, then go to step 1. If any other Temporary DTCs or DTCs are indicated, go to the indicated DTC's troubleshooting.
2. NO - Troubleshooting is complete.