Gauge Control Module Replacement
WARNING: This page is about a different car, the 2009 Acura MDX, 2008 Acura MDX, and 2007 Acura MDX. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Before replacing the gauge control module, do the "REWRITING THE ODO DATA AND TRANSFERRING THE MAINTENANCE MINDER DATA TO A NEW GAUGE CONTROL MODULE " (see
).
- Remove the parts shown:
- Driver's switch panel (see DRIVER'S OUTER DASHBOARD TRIM REMOVAL/INSTALLATION ).
- Instrument fascia (see INSTRUMENT FASCIA REMOVAL/ INSTALLATION ).
- Remove the screws from the gauge control module (A).
- Disconnect the connectors (B), and remove the gauge control module.
- Install the gauge control module in the reverse order of removal.