Dust and Pollen Filter Replacement

WARNING: This page is about a different car, the 2009 Acura MDX, 2008 Acura MDX, and 2007 Acura MDX. However, it is still accessible from the selected car via links, so may be relevant.

Open the glove box. Remove the glove box stop on right side, then let the glove box hang down (see GLOVE BOX REMOVAL/INSTALLATION ).
Remove the dust and pollen filter assembly (A) from the blower unit.

Fig 1: Identifying Dust And Pollen Filter Assembly
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Remove the filter (A) from the housing (B), and replace the filter.

Fig 2: Identifying Filter And Housing
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Install the filter in the reverse order of removal. Make sure that there is no air leaking out of the blower unit.