LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Acura >> 2004 >> NSX 3.2 NA2 >> Repair and Diagnosis >> Engine Performance >> System >> Engine Performance System Self-Diagnostics >> Self-Diagnostic System >> Retrieving Diagnostic Trouble Codes >> Retrieving DTCs Using Scan Tool
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Retrieving DTCs Using Scan Tool

  1. When the Malfunction Indicator Lamp (MIL) has been reported on, connect the Honda PGM Tester or an OBD-II scan tool to the 16-pin Data Link Connector (DLC) located under the glove box behind a removable cover. See Figure .
  2. Turn the ignition switch ON. With the Honda PGM Tester, begin troubleshooting as indicated by the tester. The DTC troubleshooting flowcharts are not needed with the tester; follow the tester's prompts. With the OBD-II scan tool, check the DTC and note it. Also check and note the freeze frame data. Refer to DIAGNOSTIC TROUBLE CODE DEFINITIONS  and begin diagnosis. See the OBD-II scan tool or Honda PGM Tester user's manuals for specific operating instructions.
scientia non olet · About LEMON Manuals