Forced Starting of Display

WARNING: This page is about a different car, the 2008 Acura TSX, 2007 Acura TSX, and 2006 Acura TSX. However, it is still accessible from the selected car via links, so may be relevant.

Special Tools Required

SCS service connector 07PAZ-0010100

Connect the SCS service connector (A) to the navigation service check connector (B) located behind the navigation unit.

Fig 1: Identifying SCS Service And Navigation Service Check Connectors
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Turn the ignition switch ON (II), and check that the diagnosis menu for the picture diagnosis starts up, and then changes to the system link menu.
NOTE: If the display fails to display the "Navi System Link" screen, refer to NO PICTURE IS DISPLAYED .