DTC B1352: Power Tailgate Control Unit Internal (EEPROM) Error
WARNING: This page is about a different car, the 2009 Acura MDX, 2008 Acura MDX, and 2007 Acura MDX. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
If you are troubleshooting multiple DTCs, be sure to follow the instructions in B-CAN System Diagnosis Test Mode A (see
TROUBLESHOOTING - B-CAN SYSTEM DIAGNOSIS TEST MODE A
).
- Turn the ignition switch to LOCK (0).
- Connect the HDS to the data link connector.
- Remove the No. 7 (10 A) fuse from the under-dash fuse/relay box.
- Wait for 1 minute, then reinstall the No. 7 (10 A) fuse to the under-dash fuse/relay box.
- Close the tailgate manually (not with the power tailgate switch).
- Turn the ignition switch ON (II).
- Check for DTCs with the HDS.
Is DTC B1352 indicated?
YES - Replace the power tailgate control unit.
NO - Intermittent failure, the power tailgate control unit is OK at this time. Check for loose or poor connections between the power tailgate control unit and the MICU.