APP Sensor Replacement

WARNING: This page is about a different car, the 2008 Acura TL and 2007 Acura TL. However, it is still accessible from the selected car via links, so may be relevant.

Remove the throttle cable (see THROTTLE CABLE REMOVAL/INSTALLATION ).
Disconnect the accelerator pedal position (APP) sensor 6P connector (A).

Fig 1: Identifying Accelerator Pedal Position Sensor 6P Connector
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Remove the bolts (B), and the APP sensor (C).
Install the parts in the reverse order of removal.