DVD-ROM Replacement
WARNING: This page is about a different car, the 2008 Acura TL and 2007 Acura TL. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Check any official Honda service web site for more service information about the navigation system.
- Turn the ignition switch to ON (II).
- Open the cover (A) on the right side of the trunk to gain access to the navigation unit.
- Press the EJECT button (B), then remove the DVD-ROM.
- Insert the new DVD-ROM with the white label facing up.
- Close the front cover. Do not turn the ignition switch to LOCK (0); watch the navigation screen until the data is down loaded to the navigation unit.
- Do the Map Matching (see MAP MATCHING
).NOTE: After servicing, the front cover and PC card slot door must be closed.