LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Acura >> 2005 >> TL Automatic >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Climate Control System >> Climate Control Unit Removal and Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Climate Control Unit Removal and Installation

  1. Turn the ignition switch OFF.
  2. Remove the glove box housing (see GLOVE BOX HOUSING REMOVAL/INSTALLATION ).
  3. Remove the throttle actuator control module (see APP SENSOR REPLACEMENT ).
  4. Disconnect the connectors (A) from the climate control unit (B), then remove the wire harness clip (C), the self-tapping screws and the climate control unit.
    Fig 1: Disconnecting Connectors From Climate Control Unit
    G03661928Courtesy of AMERICAN HONDA MOTOR CO., INC.
  5. Install the control unit in the reverse order of removal. After installation, operate the control switch assembly controls to see whether it works properly.
  6. Run the self-diagnostic function to confirm that there are no problems in the system (see GENERAL TROUBLESHOOTING INFORMATION  ).
scientia non olet · About LEMON Manuals