Climate Control Unit Removal/ Installation

WARNING: This page is about a different car, the 2009 Acura MDX, 2008 Acura MDX, and 2007 Acura MDX. However, it is still accessible from the selected car via links, so may be relevant.

Remove the audio unit (see AUDIO UNIT REMOVAL/INSTALLATION ).
Remove the self-tapping screws, bolts, brackets (A), and the climate control unit (B).

Fig 1: Identifying Self-Tapping Screws, Bolts, Brackets And Climate Control Unit
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Install the control unit in the reverse order of removal. After installation, operate the various functions to see whether works properly.
Run the self-diagnostic function to confirm that there are no problems in the system (see HOW TO USE THE SELF-DIAGNOSTIC FUNCTION WITHOUT THE HDS ).