LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Acura >> 2006 >> MDX Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 90 (Climate Control System) >> Front Evaporator Temperature Sensor Replacement
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Front Evaporator Temperature Sensor Replacement

WARNING: This page is about a different car, the 2009 Acura MDX, 2008 Acura MDX, and 2007 Acura MDX. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the driver's dashboard undercover (see DRIVER'S DASHBOARD UNDERCOVER REMOVAL/INSTALLATION ).
  2. Remove the TPMS control unit (see TPMS CONTROL UNIT REPLACEMENT ).
  3. Disconnect the connector (A) from the front evaporator temperature sensor (B), then remove the connector clip (C). Remove the self-tapping screw and the front evaporator temperature sensor.
    Fig 1: Identifying Front Evaporator Temperature Sensor, Connector And Connector Clip
    G05487695Courtesy of AMERICAN HONDA MOTOR CO., INC.
  4. Install the sensor in the reverse order of removal.
scientia non olet · About LEMON Manuals